METHOD OF SPLICING FOR THE POLY-U CONVEYOR BELT

First, I will introduce briefly the 2 types of the splice that we use now for our customers of POLY-U belt, the advantage and disadvantage, then I will demonstrate the splicing process.

The first method is:

Splicing with the wick

Preparation:

-the splice of the belt should be cut into a 45°angle

-1 adhesive wick

Process:

Alignment of the belt then cover with the adhesive wick, we use the tool to melt the wick.

Notice:

First: It won’t be easy to do the Alignment of the belt

Second: it won’t be easy to control the temperature, the high temperature will make the adhesive wick to be deformed, the surface will not be flat after splicing.

Now Let’s talk about the second type of splicing

Skiving splice

Preparation:

the belt with the length of 25mm for the skiving splice, compare to the first method, it will be easy to make the belt stable on the machine

Process:

We stable the belt on the machine

We mark the splicing part

We process the joint by sticking them together.

Notice:

This method will be much stronger than first method, cause there are two sides of rupture for the first method and only one side of rupture for this method.

Please click the link as below to watch the video for <How to splice the PU belt>on our YOUTUBE channel:

https://www.youtube.com/watch?v=wQ7GS9N46X8

For getting more info from us.

YOUTUBE: rizhi belt
WEBSITE: feltconveyor.com